How To Fix A Leak Under Bathroom Sink
When you open up the cabinet under your bathroom sink and see water chances are good that you have a leak.
How to fix a leak under bathroom sink. Shut off the main water supply to the sink you re working on and drain the pipes completely. I installed a new bathroom faucet and it came with a new drain pipe and sink drain outlet flange. When a p trap leak occurs it s usually because the nuts aren t tight enough the pipes are misaligned or a p trap washer isn t seated correctly. Step 1 inspect the leaks.
It is leaking down into my bathroom cabinet and getting everything wet. The faucet works great but the drain pipe is leaking under the sink. Determine which side of your faucet is dripping closing the water supply valves one at a time. Once you know where the leak originates you can repair or replace the defective part.
Place a small container under the valve to catch any water left in the pipes that may come out while you re working. Underneath the sink check where the leak comes from. If the leak does not stop once the first valve is switched off is another line that is leaking. Tighten the clips under the sink rim that clamp the sink to the countertop.
Before you call the plumber there are a few steps you can try yourself to fix a leaking hose under your sink. Part of knowing how to fix a leak in a bathroom sink is figuring out exactly where the leak is coming from. The water supply hose beneath your sink connects the water supply valve to the faucet above. Dribble water around the sink rim and look for leaks photo.
Step 2 turn off the water supply. How to fix it. After determining which side is leaking turn off both the supply valves. How to fix a leaky bathroom sink faucet double handle locate the leak.
It can be directly under the faucet or the handles. The leak is coming from where the plastic nut on the drain pipe meets the bottom of the bathroom sink. If the sink rim is caulked scrape away the old caulk and recaulk. A leak in the hose or a misconnected coupling could be the source of dripping water.
The compression nuts holding a sink trap to the tailpiece and waste arm are designed to be hand tightened and when you do it properly the trap is watertight. If the leak does not come from any of these locations it can come from the connection between the connector and the water supply lines. Tighten the faucet base by turning the mounting nuts underneath it.